Measuring

Measuring​

< Back to Measuring
How To Measure for Your Aqua Step if you have an Aluminum Add-On Billet with Open Slots

Step 1:

A: To know the width area of where you will be mounting your aqua step, measure underneath your add-on platform between the mounting braces. If you have an exhaust in this area, include it in your drawing with the width diameter of the exhaust.

 

B: To know the depth of your platform, measure all the way to the back of your transom. Note: If your platform is not flat underneath (some have a recession or lip) you need to draw that in diagram B below, also give us the flat area measurement all the way back to the transom.

When complete please fax your drawing to (951) 340-2056
or mail to Tech Support, P.O. Box 370 • Corona, CA 92878-0370
Include your name and daytime phone number.
Our technician will call you upon receiving your drawing.

Aqua Performance Inc. • 425 N. Smith Ave. • Corona, California 92880-6905
P.O. Box 370 • Corona, CA 92878-0370 • Ph: (951) 340-9425 • Fax: (951) 340-2056

Aqua Performance Inc.
425 N. Smith Ave.
Corona, California 92880-6905
P.O. Box 370
Corona, CA 92878-0370
Ph: (951) 340-9425
Fax: (951) 340-2056

© 2023 AQUA PERFORMANCE. All Rights Reserved.
Site Development Word of Mouth Development